Properties
Water repellent and oil repellent nantotechnology product, suitable for protection of marble, granite and other materials with particularly low absorption, on vertical or horizontal surfaces, on interior or exterior areas. It contains nanomoles in its formula to impregnate surfaces with considerable ease and in depth, making them waterproof. It therefore protects surfaces from all possible damage from humidity, water or freezing. Furthermore they seal surfaces against common household fouling, soot, nicotine and ambient pollutants. Thus cleaning of surfaces becomes very easy without requiring strong detergents. The NANO PROOF MARMO DS – 275 does not develop a surface film nor glazes, peels or produces a yellowish colour. It effectively retains the natural appearance and texture of surfaces. Resistant to UV solar radiation, excessive temperature variations, permanent moisture and freezing. Shields surfaces and prevents their discoloration. Odourless, water based, user and environment friendly
Application
The NANO PROOF MARMO DS - 275 provides long-term protection of surfaces with very low absorption such as marble and granite.
Instuctions
1. Substrate preparation
Surfaces should be clean, dry and free from dirt, salt, grease and all loose materials. Ideally, it is recommended to use BIOCLEAN biodegradable cleaner by DUROSTICK for tile joints, tiles, granite and marble.
2. Application
Applied with flat brush, roller brush, air or airless spray gun in a single coat all over the surface. After 10 - 15 minutes, remove material residues that have not been absorbed using a damp soft cloth. For protection that will last even longer, apply a second coat, approximately 30 minutes after the first, especially on surfaces with higher absorption. Stir well before use. The product is ready to use. Non thinnable.
CLEANING
Tools should be cleaned immediately after use with water or - if necessary - with soap or detergent solution.
