Properties
Elastic waterproof self cleaning top coat plaster, granule size up to 0.8mm with new technology elastic and water repellent resins. Ready for interior and exterior use only by adding water. Ideal for demanding projects, ensures long-term resistance. Available in white. Can be coloured to 24 shades by pigments DUROCOLOR POWDER –P by DUROSTICK in 250gr pouches. It is classified under class GP: CSIII/W2, as per ΕΝ 998-1.
Application
HYDROSTOP PLASTER ELASTIC is easy to use on prepared masonry with base coat plaster from concrete, bricks, cement blocks, porobeton on cement boards and plaster boards, as well as on masonry made from wood or sheet steel, after these are coated with the DUROSTICK DS-260 quartz primer.
Use
Surface preparation: The substrate shall be free from dust, oil or loose materials. It must be thoroughly wetted. To improve the quality of results before HYDROSTOP PLASTER ELASTIC application, prime the substrate with coloured plaster preparation primer HYDROSTOP PLASTER PRIMER to avoid dehydration and uneven drying.
Application:Pour HYDROSTOP PLASTER ELASTIC in a pot of water where the DUROCOLOR POWDER-P pigment powder from colour swatch has been mixed, at a ratio of 5.0-5.5 lt water/bag, and stir with power drill in low revs until the mix is fully homogenized. Allow the mix to cure for 5-10 minutes and periodically repeat stirring. The plaster shall be spread with stainless steel spatula to a thickness up to 0.5cm.
After the plaster has soaked-up, sand the surface with plastic grinder or hard grinder for plaster surfaces.
Attention: During the final sanding process the grinder must be slightly damp, not excessively soaked, as there is a risk of local discoloration of the top surface.